-40%
640 x 480 VGA CMOS + AL422 3M-Bits OV7670 FIFO Camera STM32 Driver Module I2C
$ 5.24
- Description
- Size Guide
Description
HomeArduino
Module
Sensor
Chips
About Us
Specification:
This is a great camera module for DIY. This camera module comes with high quality lens.
Features:
High sensitivity for low-light operation
Low operating voltage for embedded application
Standard SCCB interface compatible with I2C interface
With
AL422 3M-Bits FIFO
Raw RGB, RGB (GRB4:2:2, RGB565/555/444),YUV(4:2:2) and YCbCr(4:2:2)output format
Support VGA, CIF and from CIF to 40 x 30 format
Vario Pixel method for sub-sampling
Auto Image Control: AEC, AGC, AWB, ABF, ABLC
Image Quality Control: Color saturation, hue, gamma, sharpness and anti-blooming
ISP includes noise reduction and defect correction
Support image scaling
Lens shading correction
Flicker 50/60Hz auto detection
Color saturation level auto adjust
Edge enhancement level auto adjust
De-noise level auto adjust
Parameter:
Photosensitive Array: 640 x 480
IO Voltage: 2.5V to 3.0V
Operating Power: 60mW/15fpsVGAYUV
Sleeping Mode: <20μA
Operating Temperature: -30 to 70 deg C
Output Format: YUV/YCbCr4:2:2 RGB565/555/444 GRB4:2:2 Raw RGB Data (8 digit)
Lens Size: 1/6"
Vision Angle: 25 degree
Max. Frame Rate: 30fps VGA
Sensitivity: 1.3V / (Lux-sec)
Signal to Noise Ratio: 46 dB
Dynamic Range: 52 dB
Browse Mode: By row
Electronic Exposure: 1 to 510 row
Pixel Coverage: 3.6μm x 3.6μm
Duck Current:: 12 mV/s at 60℃
PCB Size (L x W): Approx. 1.4 x 1.4 inch / 3.5 x 3.5 cm
Package Includes:
1 x OV7670 Camera Module
Payment
Shipping
Refund
Payment
We accept PayPal only.
But we only
Accept
your
Ebay Address
,Please Make sure it's 100% right.
Payment must be received in 5 business days of auction closing.
Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.
Shipping
Fill your shipping info
Refund
All package need to
wait 30 days
(US only n
eed 7-10 days)
,
Please take care it.Less than 30 days,we can't take a refund
.
If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please contact us and double check the return address before you return it.
If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.